The adjustment in using procedure of hydraulic torque wrench is the most important step, Hydraulic torque wrench is an industrial strength torque wrench, which can exert the powerful ability of large torque bolt head, mainly used in industrial pipeline engineering, oil drilling and other heavy industrial structures. How to use hydraulic torque wrench?

1. Installation: connect the power supply and hydraulic torque wrench with hose according to the operation steps in the manual, and tighten all joints to ensure that all components are connected safely.
2. Adjustment: all hydraulic torque wrenches have adjustable settings, which need to be set according to the preset torque level. If there is no specific torque setting, you can start the lowest setting and start working. Do not over tighten any bolts or nuts, because it can break the thread. It is better to use the hydraulic torque wrench correctly by referring to the torque conversion diagram.
Before use, you must understand the operating instructions of the tool and install it according to the instructions of the user manual.
3. Use: when the spanner is connected with the nut to work, it is necessary to align the washer correctly. This step is very important. Loosen the pressure regulator so that the wrench can be adjusted at any time. You need to adjust the torque value at any time during the operation. At the end of the work, release the torque mechanism and remove the overall connection.

Using Procedure of Hydraulic Torque Wrench

Using Procedure of Hydraulic Torque Wrench

Hydraulic Torque Wrench, Hydraulic Torque, Hydraulic Torque Tools, Drive Torque Wrench TWHD Series, Low Profile Hexagon Hydraulic Torque Wrench Maximum Torque: 28370 Ft.lbs Hexagon Range: 3/4 – 6 1/8 inch Nose Radius: 1.17-4.64 inch Maximum Operating Pressure: 10,000 psi Principle of Torque Wrenches Selecting: Please refer to the bolt torque recommendation form. See ” How […]